Hydrocyclone Desilter
Detailed Description of desilter
Hydrocyclone desilter is the 3rd phase equipment in drilling fluid solids control system. Hydrocyclone Desilter’s cone including 4" and 5" mainly separate 12~47μm solid. One set of desilter has 6-12 pieces of hydrocyclones and the hydrocyclone’s material is polyurethane.
Features
1.Sand size solids removal (12~47 microns)
2.Polymeric cones
3.Lightweight, compact
4.Lifting eye welded to frame
Hydrocyclone desilter is usually set behind Desander separator
Benefits
1.Be better effect for subsequent process
2.Durable and low cost replacement
3.Save much space and provide easy handling
4.More flexible, user-friendly and proper cost
5.Provide easy control on treating capacity
6.Give user convenience on cones installation, etc.
7.Better to protect equipment when handle and transport
Detailed Product Description
1.4", 5" desilter cones
2.lower noise and long usable
3.The balanced feeding design keep it working very well
Technique parameters
|
Model
|
CNQ100
|
CNQ125
|
|
Treating capacity
|
≤240m3/h (1056GPM)
|
≤300m3/h(1320GPM)
|
|
Desilter cones
|
4"
|
5"
|
|
Cones quantity
|
4~12EA
|
4~12EA
|
|
Working pressure
|
0.15~0.35Mpa
|
|
Feed inlet
|
100-150mm
|
|
Discharge output
|
125-200mm
|
|
Separation size
|
12~47μm
|
|
Bottom shaker screen
|
1.0m2 (600×1600mm) Optional
|
Hydrocyclone desilter is one important equipment among whole drilling mud system. Usually separate finer particles after desander hydrocyclones. The bottom shaker is optional to get better filtration effect. For oil dirlling mud solids control, the desilter cones are 4". According to clients' requirement the size can be 3" also. Under proper working pressure, the separation efficiency will be 90~95%. You need more detail and price on desilter? Come to contact me alisa at jxsolidscontrol dot com.
