Product Description

Hydrocyclone Desilter

Detailed Description of desilter

Hydrocyclone desilter is the 3rd phase equipment in drilling fluid solids control system. Hydrocyclone Desilter’s cone including 4" and 5" mainly separate 12~47μm solid. One set of desilter has 6-12 pieces of hydrocyclones and the hydrocyclone’s material is polyurethane. 

Features

1.Sand size solids removal (12~47 microns)
2.Polymeric cones
3.Lightweight, compact
4.Lifting eye welded to frame

Hydrocyclone desilter is usually set behind Desander separator

Benefits

1.Be better effect for subsequent process

2.Durable and low cost replacement

3.Save much space and provide easy handling

4.More flexible, user-friendly and proper cost

5.Provide easy control on treating capacity

6.Give user convenience on cones installation, etc.

7.Better to protect equipment when handle and transport

 

Detailed Product Description
1.4", 5" desilter cones
2.lower noise and long usable
3.The balanced feeding design keep it working very well

Technique parameters

Model	CNQ100	CNQ125
Treating capacity	≤240m3/h (1056GPM)	≤300m3/h(1320GPM)
Desilter cones	4"	5"
Cones quantity	4~12EA	4~12EA
Working pressure	0.15~0.35Mpa
Feed inlet	100-150mm
Discharge output	125-200mm
Separation size	12~47μm
Bottom shaker screen	1.0m2 (600×1600mm) Optional

Hydrocyclone desilter is one important equipment among whole drilling mud system. Usually separate finer particles after desander hydrocyclones. The bottom shaker is optional to get better filtration effect. For oil dirlling mud solids control, the desilter cones are 4". According to clients' requirement the size can be 3" also. Under proper working pressure, the separation efficiency will be 90~95%. You need more detail and price on desilter? Come to contact me alisa at jxsolidscontrol dot com.

Payment Terms︰ T/T

Product Image